What is a standby generator?

A standby generator is a permanently installed backup-power system connected to the property through transfer equipment. It can start automatically when utility power fails and shut down after utility power returns.

Will it power my entire home?

That depends on the generator, electrical demand, transfer equipment, fuel supply and intended loads. Some systems support selected essential circuits, while others are designed for broader coverage. We assess the property before recommending the approach.

Can it keep my well pump and heating system running?

Potentially. The equipment requirements and starting loads must be included in the assessment and approved design.

Does a standby generator use natural gas or propane?

Generac home standby generators are designed to use an approved natural-gas or liquid-propane fuel source, depending on the model and property setup.

Who completes the gas or propane work?

Gas or propane work must be completed under the appropriate licence and permit. We define our electrical scope and coordinate with the responsible qualified trade where required.

Do you install the automatic transfer switch?

Yes. Transfer equipment and its electrical connection are core parts of an approved standby-generator electrical installation.

Generator projects can involve electrical permits and, for gas-fired equipment, gas permits. We obtain and coordinate the electrical permit for our scope. The responsible gas contractor handles applicable fuel-side permitting.

How do I know what generator size I need?

Start with what you want to keep powered. Generator selection also depends on electrical demand, starting loads, fuel supply and the chosen transfer approach. We determine the required information during the project review.

Can I use a standby generator as my main power source?

Home standby generators are designed as backup to utility power, not as the normal primary power source.

How long will the installation take?

Timing depends on equipment availability, site work, electrical scope, fuel coordination, permits and inspections. We explain the expected sequence once the project is defined.

Does the generator need ongoing maintenance?

Yes. Standby generators require maintenance according to the manufacturer’s instructions.

STANDBY GENERATOR INSTALLATION

Backup Power That Is Ready When You Need It

Keep the most important parts of your home or property operating during an outage. We will assess what you want to power, recommend the right Generac standby setup and coordinate the electrical installation from the generator connection through the transfer equipment and required permit.

Call 236-862-7898

Red Seal Electrician
TSBC Licence #LEL0212268
Insured & Bonded
18+ Years of Electrical Experience
500+ Projects
One-Year Workmanship Warranty

Keep the Important Things Powered

When the power goes out, the things you rely on should not have to stop. We will help you plan backup power around what matters most—heat, water, refrigeration, lighting, internet, security or broader coverage for your property.

KEEP THE HEAT ON
Support the heating equipment, controls and other important home systems you depend on during an outage.
KEEP WATER RUNNING
Plan backup power for wells, pumps and other equipment that rural homes and acreages may rely on.
KEEP FOOD, LIGHTS AND CONNECTIONS ON
Keep refrigeration, lighting, internet, device charging and security equipment available when utility power is down.
FEEL READY FOR THE NEXT OUTAGE
Reduce the disruption and uncertainty of an extended outage with backup power that starts automatically.

When the Power Goes Out, Your Generator Steps In

A standby generator is permanently installed outside your property. It detects an outage, starts automatically and powers the parts of your home or property included in the plan. When utility power returns, it switches back and shuts down on its own.

01
THE POWER GOES OUT
The system detects when utility power has been interrupted.
02
YOUR GENERATOR STARTS
The standby generator starts automatically without having to bring out and connect a portable generator.
03
THE IMPORTANT THINGS STAY POWERED
The generator supplies the parts of your home or property included in the planned backup-power setup.
04
UTILITY POWER RETURNS
The system switches the property back to utility power and the generator shuts down automatically.

What Do You Want to Keep Running?

You do not need to know what generator size you need. Tell us what you want available during an outage, and we will recommend a setup that fits your property and priorities.

THE THINGS YOU RELY ON MOST
Prioritize heating, refrigeration, water equipment, lighting, internet, security and the other parts of the property that matter most during an outage.
MORE OF YOUR HOME
If you want broader coverage, we will assess the electrical demand, available generator options, transfer equipment and fuel requirements.
WELLS, PUMPS AND ACREAGE NEEDS
Include the water systems, gates, shops and other equipment that your rural property depends on.
PLAN FOR WHAT COMES NEXT
Let us know about future additions such as a heat pump, suite, hot tub or EV charger so the recommended setup accounts for your plans.

We Will Help Determine the Right Setup

You do not need to calculate generator size or prepare a technical equipment list before contacting us. Start with a call or site visit. We will look at the property, discuss what you want to keep powered and identify the electrical information needed for the next step.

01
Call us or request a site visit.
02
Walk through the systems and equipment that matter during an outage.
03
Review the electrical service, generator location and transfer approach.
04
Coordinate any fuel-supply information required from the qualified gas or propane contractor.
05
Present the recommended electrical scope and quote before approved work begins.

Electrical Installation From Connection to Transfer

01
Property and load review
Review the intended backup loads and relevant electrical conditions with the owner and other project professionals where required.
02
Generator and transfer equipment
Install and connect the approved generator electrical equipment and compatible transfer switch within our defined scope.
03
Panels circuits and load management
Complete approved panel, circuit, control or load-management work required by the selected standby-power design.
04
Electrical permit and inspection
Obtain the required electrical permit for our work and coordinate the applicable electrical inspection process.
05
Testing and customer handover
Test the completed electrical installation and review basic system operation and owner responsibilities.
06
Defined project responsibilities
Clearly identify the generator supply, base or pad, gas or propane work, utility coordination, landscaping, excavation and other trade responsibilities in the quote.

One Project With Clearly Defined Trades

A gas-fired standby generator involves both electrical and fuel-system requirements. Our team handles the approved electrical scope and coordinates project information with the appropriately licensed gas or propane contractor where fuel work is required.

Electrical responsibilities may include

Generator electrical connection.
Automatic transfer-switch installation.
Approved panel, circuit and control work.
Electrical permit and inspection coordination.
Electrical testing and commissioning within our scope.

Fuel and other responsibilities may include

Natural-gas or propane supply assessment.
Gas piping, regulator and gas permit work.
Generator pad, excavation, landscaping or protective barriers.
Utility or municipal requirements outside the electrical scope.

Backup Power Planned Around the Property

01
Licensed Generac Installer
We can supply and complete the licensed electrical installation for approved Generac standby-generator projects.
02
Thoughtful load planning
We begin with what the owner wants to keep operating and consider the electrical system and other planned property upgrades.
03
Clear project coordination
Electrical, fuel, site and third-party responsibilities are identified so the owner understands how the project comes together.
04
Clean organized workmanship
Our team installs electrical equipment and wiring neatly with serviceability and the finished property in mind.
05
Permits and inspection
We obtain the required electrical permit for applicable work and coordinate the electrical inspection process.
06
Company-level accountability
Customers receive a defined scope, clear communication and one accountable electrical contractor for the approved electrical work.

Frequently Asked Questions

Standby Generator Installation Across the Fraser Valley and Lower Mainland

We serve generator projects throughout Abbotsford, Mission, Chilliwack, Aldergrove, Langley and the broader Lower Mainland. We have also travelled as far as Boston Bar and Kamloops when projects required it. Call us wherever the property is located and we will let you know how we can help.

Abbotsford
Mission
Chilliwack
Aldergrove
Langley

View All Service Areas

Tell Us What You Want to Keep Powered

Call us or request a site visit. You do not need to calculate generator size or prepare technical information first.

Call 236-862-7898

Backup Power That Is Ready When You Need It

Keep the Important Things Powered

KEEP THE HEAT ON

KEEP WATER RUNNING

KEEP FOOD, LIGHTS AND CONNECTIONS ON

FEEL READY FOR THE NEXT OUTAGE

When the Power Goes Out, Your Generator Steps In

THE POWER GOES OUT

YOUR GENERATOR STARTS

THE IMPORTANT THINGS STAY POWERED

UTILITY POWER RETURNS

What Do You Want to Keep Running?

THE THINGS YOU RELY ON MOST

MORE OF YOUR HOME

WELLS, PUMPS AND ACREAGE NEEDS

PLAN FOR WHAT COMES NEXT

We Will Help Determine the Right Setup

Electrical Installation From Connection to Transfer

Property and load review

Generator and transfer equipment

Panels circuits and load management

Electrical permit and inspection

Testing and customer handover

Defined project responsibilities